3044652 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Open side panel
  Yes
• Result of power-frequency withstand voltage test
  Test passed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Setpoint
  1 N
• Degree of pollution
  3
• Connection in acc. with standard
  CSA
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Result of thermal test
  Test passed
• Shock form
  Half-sine
• Number of connections
  4
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of tight fit on support
  Test passed
• Area of application
  Railway industry
• Back of the hand protection
  guaranteed
Result of surge voltage test
Test passed
ASD level
6.12 (m/s2)2/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
152 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²
Insulating material group
I
Color
gray
Nominal voltage UN
500 V
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
End cover width
2.2 mm
Height NS 35/7,5
65 mm
Nominal current IN
24 A
Insulating material
PA
Overvoltage category
III
Flammability rating according to UL 94
V0
Proof of thermal characteristics (needle flame) effective duration
30 s
Maximum load current
28 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
5.2 mm
Bending test rotation speed
10 rpm
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Length
69.9 mm
Conductor cross section flexible max.
4 mm²
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 32/NS 35
Acceleration
30g
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
72.5 mm
Conductor cross section flexible min.
0.14 mm²
Test duration per axis
5 h
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
UNSPSC 19.0
39121410
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
64.4 mm
Connection method
Screw connection
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
Number of levels
2
Conductor cross section AWG max.
12
2 conductors with same cross section, solid max.
1.5 mm²
UNSPSC 7.0901
39121410
2 conductors with same cross section, stranded min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Tightening torque, min
0.5 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
ETIM 3.0
EC000901
ETIM 2.0
EC000901
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Stripping length
9 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Tightening torque max
0.6 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Internal cylindrical gage
A3
Screw thread
M3
Ambient temperature (assembly)
-5 °C ... 70 °C
UNSPSC 21.0
39121410