3044775 Phoenix Contact Terminal Blocks

Product Details

• Test spectrum
  Service life test category 1, class B, body mounted
• Number of levels
  2
• Flammability rating according to UL 94
  V0
• Color
  gray
• Insulating material group
  I
• Maximum load current
  20 A (with 6 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Test duration per axis
  5 h
• Shock form
  Half-sine
• Shock duration
  30 ms
• ECLASS 7.0
  27141126
• Number of connections
  4
Insulating material
PA
Rated surge voltage
6 kV
Overvoltage category
III
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
ASD level
1.857 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
69.9 mm
End cover width
2.2 mm
Screw thread
M3
Tightening torque max
0.8 Nm
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ECLASS 5.1
27141100
Potentials
1
Nominal cross section
4 mm²
Degree of pollution
3
Nominal current IN
20 A
Nominal voltage UN
500 V
Open side panel
Yes
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Setpoint
1 N
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Short-time current
0.48 kA
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
6.2 mm
Height NS 35/15
72.5 mm
Tightening torque, min
0.6 Nm
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ECLASS 9.0
27141126
ETIM 2.0
EC000901
UNSPSC 18.0
39121410
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
64.4 mm
Connection method
Screw connection
Height NS 35/7,5
65 mm
Stripping length
9 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
10
Min. AWG conductor cross section, flexible
26
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A4
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
ETIM 3.0
EC000901
ETIM 6.0
EC000902
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410