3044791 Phoenix Contact Terminal Blocks

Product Details

• Flammability rating according to UL 94
  V0
• Bending test rotation speed
  10 rpm
• Shock form
  Half-sine
• Length
  69.9 mm
• Nominal voltage UN
  800 V
• Maximum load current
  36 A (with 6 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Insulating material group
  I
• Open side panel
  Yes
• ECLASS 5.1
  27141100
• ETIM 4.0
  EC000897
• UNSPSC 18.0
  39121410
• Result of surge voltage test
  Test passed
• Connection method
  Screw connection
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.14 mm²
• Conductor cross section solid min.
  0.14 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• 2 conductors with same cross section, solid min.
  0.14 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.14 mm²
Stripping length
9 mm
ECLASS 5.0
27141100
ETIM 2.0
EC000901
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 3.0
EC000901
ECLASS 7.0
27141120
ETIM 7.0
EC000897
China RoHS
Environmentally Friendly Use Period = 50 years
Ambient temperature (assembly)
-5 °C ... 70 °C
UNSPSC 21.0
39121410
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test duration per axis
5 h
Height
64.4 mm
Width
6.2 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section tensile test
6 mm²
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Conductor cross section AWG min.
26
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Short-time current
0.48 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Conductor cross section solid max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Power frequency withstand voltage setpoint
2 kV
Requirements, voltage drop
≤ 3.2 mV
Result of voltage-drop test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Height NS 35/7,5
65 mm
2 conductors with same cross section, solid max.
1.5 mm²
ECLASS 11.0
27141120
UNSPSC 13.2
39121410
Setpoint
1 N
Shock duration
18 ms
Internal cylindrical gage
A4
ECLASS 4.0
27141100
Tightening torque, min
0.6 Nm
ECLASS 10.0.1
27141120
UNSPSC 12.01
39121410
Bending test turns
135
UNSPSC 20.0
39121410
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
UNSPSC 11
39121410
Result of power-frequency withstand voltage test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Tightening torque max
0.8 Nm
UNSPSC 6.01
30211811
Degree of pollution
3
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tensile test result
Test passed
Screw thread
M3
Number of connections
4
Area of application
Railway industry
Nominal current IN
30 A
Overvoltage category
III
Number of levels
2
Insulating material
PA
Color
blue
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tractive force setpoint
80 N
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
End cover width
2.2 mm
Height NS 35/15
72.5 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Nominal cross section
4 mm²
Connection in acc. with standard
CSA
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)