2904371 Phoenix Contact AC/DC Power Supplies

Product Details

• Depth
  84 mm
• Degree of pollution
  2
• Current consumption
  0.55 A (400 V AC)
• Mains buffering time
  > 65 ms (400 V AC)
• Power factor (cos phi)
  0.48
• Installation distance top/bottom
  30 mm / 30 mm
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Input voltage range
  2x 264 V AC ... 575 V AC
• Recommended breaker for input protection
  6 A ... 16 A (Characteristics B, C, D, K)
• Nominal output voltage
  24 V DC ±1 %
• Connection in series
  No
• Power loss nominal load max.
  < 12 W
• Protection class
  II (in closed control cabinet)
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Conductor cross section flexible max.
  2.5 mm²
• Standard - Electrical safety
  IEC 62368-1/VDE 0805 (SELV)
• Width
  55 mm
• Installation distance right/left
  0 mm / 0 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
• Extended input voltage range in operation
  2x 264 V AC ... 320 V AC (Derating 10 %)
Nominal power consumption
211.3 VA
Nominal output current (IN)
3.75 A
Protection against overvoltage at the output (OVP)
≤ 35 V DC
Net weight
0.32 kg
Housing material
Polycarbonate
Assembly instructions
alignable: 0 mm horizontally, 30 mm vertically
Conductor cross section AWG min.
24
EMC requirements for noise immunity
EN 61000-6-1
Degree of protection
IP20
Climatic class
3K3 (in acc. with EN 60721)
Frequency range (fN)
50 Hz ... 60 Hz 10 %
Input fuse
2 A (slow-blow, internal)
Protective circuit/component
Varistor
Derating
55 °C ... 70 °C (2.5%/K)
Output power
90 W
Efficiency
typ. 89 % (400 V AC)
Insulation voltage input/output
4 kV AC (type test)
Connection method
Screw connection
Conductor cross section AWG max.
14
Screw thread
M3
CSA
CAN/CSA-C22.2 No. 60950-1-07
Mains variation/undervoltage
EN 61000-4-11
Electrostatic discharge
EN 61000-4-2
Test field strength
10 V/m
Input
2 kV (Test Level 3 - symmetrical)
Voltage
10 V (Test Level 3)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 11.0
27040701
Height
90 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage range
2x 400 V AC ... 500 V AC
Inrush current
< 30 A (typical)
Type of protection
Transient surge protection
Connection in parallel
no
Residual ripple
< 50 mVPP (with nominal values)
Maximum power dissipation in no-load condition
< 0.7 W
MTBF (IEC 61709, SN 29500)
> 828000 h (40 °C)
Conductor cross section solid max.
2.5 mm²
Stripping length
8 mm
EMC requirements for noise emission
EN 61000-6-3
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
UL approvals
UL/C-UL listed UL 508
Discharge in air
8 kV (Test Level 3)
Frequency range
10 kHz ... 80 MHz
Output
1 kV (Test Level 2 - symmetrical)
Voltage dips
EN 61000-4-11
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Feedback voltage resistance
< 35 V DC
Foot latch material
POM (Polyoxymethylen)
Comments
Criterion A
ECLASS 5.0
27049000
ECLASS 5.1
27049000
UNSPSC 19.0
39121004
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Standard - Safety of transformers
EN 61558-2-16
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic HF field
EN 61000-4-3
Conducted interference
EN 61000-4-6
ECLASS 10.0.1
27040701
ECLASS 6.0
27049000
UNSPSC 13.2
39121004
UNSPSC 21.0
39121004
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Standard - Safe isolation
DIN VDE 0100-410
Surge voltage load (surge)
EN 61000-4-5
ECLASS 7.0
27049002
ECLASS 9.0
27040701
ETIM 7.0
EC002540
Contact discharge
6 kV (Test Level 3)
Fast transients (burst)
EN 61000-4-4
Criterion A
Normal operating behavior within the specified limits.
ECLASS 4.1
27040700
ETIM 6.0
EC002540
UNSPSC 20.0
39121004
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
ECLASS 4.0
27040700
ETIM 4.0
EC002540
UNSPSC 18.0
39121004