2904375 Phoenix Contact AC/DC Power Supplies

Product Details

• Height
  90 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Input voltage range
  85 V AC ... 264 V AC
• Width
  35 mm
• Climatic class
  3K3 (in acc. with EN 60721)
• Frequency range (fN)
  50 Hz ... 60 Hz 10 %
• Mains buffering time
  > 30 ms (120 V AC)
• Power factor (cos phi)
  0.49
• Nominal output voltage
  5 V DC ±1 %
• Derating
  55 °C ... 70 °C (2.5%/K)
• Connection in series
  yes
• Control deviation
  < 1 % (change in load, static 10 % ... 90 %)
• Maximum power dissipation in no-load condition
  < 0.3 W
• Degree of protection
  IP20
• Installation distance right/left
  0 mm / 0 mm
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Inrush current
  < 30 A (typical)
• Recommended breaker for input protection
  6 A ... 16 A (Characteristics B, C, D, K)
• Protective circuit/component
  Varistor
Connection in parallel
Yes, for redundancy and increased capacity
Feedback voltage resistance
< 10 V DC
Residual ripple
< 100 mVPP (with nominal values)
Output power
40 W
Net weight
0.21 kg
Insulation voltage input/output
4 kV AC (type test)
Mounting position
horizontal DIN rail NS 35, EN 60715
Assembly instructions
alignable: 0 mm horizontally, 30 mm vertically
Conductor cross section flexible min.
0.2 mm²
Stripping length
8 mm
Screw thread
M3
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Mains variation/undervoltage
EN 61000-4-11
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Discharge in air
8 kV (Test Level 3)
Comments
Criterion A
Fast transients (burst)
EN 61000-4-4
Voltage dips
EN 61000-4-11
Depth
84 mm
Installation distance top/bottom
30 mm / 30 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Nominal input voltage range
100 V AC ... 240 V AC
Current consumption
0.8 A (100 V AC)
Input fuse
2 A (slow-blow, internal)
Type of protection
Transient surge protection
Nominal output current (IN)
8 A (-25 °C ... 55 °C)
Protection against overvoltage at the output (OVP)
≤ 10 V DC
Typical response time
< 1 s
Efficiency
typ. 84 % (120 V AC)
MTBF (IEC 61709, SN 29500)
> 1201000 h (40 °C)
Foot latch material
POM (Polyoxymethylen)
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
14
EMC requirements for noise emission
EN 61000-6-3
Standard - Safety of transformers
EN 61558-2-16
Standard - Safe isolation
DIN VDE 0100-410
UL approvals
UL/C-UL listed UL 508
Electrostatic discharge
EN 61000-4-2
Contact discharge
6 kV (Test Level 3)
Test field strength
10 V/m
Input
2 kV (Test Level 3 - symmetrical)
Voltage
10 V (Test Level 3)
Conducted interference
EN 61000-4-6
ECLASS 11.0
27040701
ECLASS 5.0
27049000
ECLASS 5.1
27049000
ECLASS 7.0
27049002
UNSPSC 18.0
39121004
UNSPSC 21.0
39121004
Degree of pollution
2
Nominal power consumption
97.1 VA
Power loss nominal load max.
< 7.5 W
Protection class
II (in closed control cabinet)
Housing material
Polycarbonate
Connection method
Screw connection
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
EMC requirements for noise immunity
EN 61000-6-1
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
CSA
CAN/CSA-C22.2 No. 60950-1-07
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electromagnetic HF field
EN 61000-4-3
Frequency range
10 kHz ... 80 MHz
Output
1 kV (Test Level 2 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
ECLASS 9.0
27040701
ECLASS 6.0
27049000
ETIM 7.0
EC002540
UNSPSC 13.2
39121004
UNSPSC 20.0
39121004
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.0
27040700
ECLASS 4.1
27040700
ETIM 6.0
EC002540
ETIM 4.0
EC000599
UNSPSC 19.0
39121004