2904599 Phoenix Contact AC/DC Power Supplies

Product Details

• Installation distance right/left (active)
  15 mm / 15 mm (POut ≥50% )
• Installation distance top/bottom (active)
  30 mm / 30 mm (POut ≥50% )
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Climatic class
  3K3 (in acc. with EN 60721)
• Discharge current to PE
  < 0.25 mA (264 V AC, 60 Hz)
• Inrush current
  typ. 13 A (at 25 °C)
• Recommended breaker for input protection
  6 A ... 16 A (Characteristic B, C or comparable)
• Nominal output voltage
  24 V DC
• Nominal output current (IN)
  3.8 A
• Type of protection
  Transient surge protection
• Connection in series
  yes
• Protection against overvoltage at the output (OVP)
  ≤ 32 V DC
• Residual ripple
  < 45 mVPP (with nominal values)
• Environmental protection directive
  RoHS Directive 2011/65/EU
• Connection method
  Screw connection
• Conductor cross section AWG min.
  26
• Conductor cross section AWG max.
  14
• Stripping length
  8 mm
• Standard - Safe isolation
  IEC 61558-2-16
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
Noise emission
EN 55016
Electromagnetic HF field
EN 61000-4-3
Frequency range
50 Hz ... 60 Hz
Surge voltage load (surge)
EN 61000-4-5
Power frequency magnetic field
EN 61000-4-8
Additional text
Test Level 2
Test level 1
16.67 Hz 50 Hz 60 Hz (Test Level 3)
Test level 2
16.67 Hz 50 Hz 60 Hz (Test Level 4)
ECLASS 10.0.1
27040701
ECLASS 7.0
27049002
UNSPSC 21.0
39121004
Width
45 mm
Installation distance top/bottom (active, passive)
30 mm / 30 mm (POut ≤50 %)
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Degree of pollution
2
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
Current consumption
1 A (100 V AC)
Dielectric strength maximum
300 V AC 30 s
Mains buffering time
typ. 35 ms (120 V AC)
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (constant capacity)
Connection in parallel
Yes, for redundancy and increased capacity
Feedback voltage resistance
≤ 35 V DC
Output power
90 W
Net weight
0.296 kg
Protection class
II
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section flexible max.
2.5 mm²
Standard - Electrical safety
IEC 61010-2-201 (SELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
SIQ
CB-Scheme (IEC 61010-1, IEC 61010-2-201)
Conducted noise emission
EN 55016
Comments
Criterion B
Input
2 kV (symmetrical)
Voltage
300 V (1 s)
Voltage dips
EN 61000-4-11
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Attenuated oscillating wave
EN 61000-4-18
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242213
UNSPSC 13.2
39121004
Depth
90 mm
Installation distance top/bottom (passive)
30 mm / 30 mm (POut ≥50% )
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
ECLASS 9.0
27040701
UNSPSC 19.0
39121004
Height
99 mm
Installation distance right/left (passive)
5 mm / 5 mm (POut ≥50% )
Degree of protection
IP20
Ambient temperature (start-up type tested)
-40 °C
Installation height
≤ 5000 m (> 2000 m, observe derating)
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Nominal power consumption
104 VA
Input fuse
3.15 A (slow-blow, internal)
Protective circuit/component
Varistor
Derating
> 60 °C (2.5%/K)
Dynamic Boost (IDyn.Boost)
7 A (≤ 60 °C (5 s))
Maximum power dissipation in no-load condition
< 1 W (120 V AC)
Efficiency
typ. 92.8 % (120 V AC)
Assembly instructions
DIN rail mounting
Conductor cross section solid min.
0.14 mm²
EMC requirements for noise immunity
EN 61000-6-1
EMC requirements for noise emission
EN 61000-6-3
Standard - Safety of transformers
EN 61558-2-16
UL approvals
UL Listed UL 61010-1
Electrostatic discharge
EN 61000-4-2
Test field strength
1000 A/m
Output
1 kV (Test Level 3 - symmetrical)
Signal
0.5 kV (Test Level 2 - symmetrical)
Frequency
60 Hz
Number of periods
0.5 / 1 / 5 / 50 periods
Voltage dip
0 %
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27049000
UNSPSC 18.0
39121004
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
Typical response time
500 ms
MTBF (IEC 61709, SN 29500)
> 1272000 h (25 °C)
Power loss nominal load max.
< 7 W (120 V AC)
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.14 mm²
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
Standard - power supply devices for low voltage with DC output
EN 61204-3
Contact discharge
8 kV (Test Level 4)
Discharge in air
8 kV (Test Level 3)
Fast transients (burst)
EN 61000-4-4
I/O/S
asymmetrical
Conducted interference
EN 61000-4-6
Pulse-shape magnetic field
EN 61000-4-9
Criterion A
Normal operating behavior within the specified limits.
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 11.0
27040701
ETIM 6.0
EC002540
ETIM 7.0
EC002540
UNSPSC 20.0
39121004