2904617 Phoenix Contact AC/DC Power Supplies

Product Details

• Frequency range (fN)
  50 Hz ... 60 Hz -10 % ... +10 %
• Selective Fuse Breaking (ISFB)
  120 A (15 ms)
• Protection against overvoltage at the output (OVP)
  < 30 V DC (double protection incl. shutdown)
• Dynamic Boost (IDyn.Boost)
  30 A (5 s)
• Feedback voltage resistance
  ≤ 35 V DC
• Efficiency
  typ. 92.7 % (120 V AC)
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section flexible max.
  1.5 mm²
• EMC requirements for noise emission
  EN 61000-6-3
• Standard - Safe isolation
  IEC 61558-2-16
• Connection in series
  yes
• Maximum power dissipation in no-load condition
  < 5 W (120 V AC)
• MTBF (IEC 61709, SN 29500)
  > 868000 h (25 °C)
• Connection method
  Push-in connection
• Conductor cross section AWG max.
  16
• Nominal power consumption
  520 VA
• Type of protection
  Transient surge protection
• Test level 7
  16.7 Hz 50 Hz 60 Hz (Test Level 4)
• Height
  130 mm
• Installation distance right/left
  5 mm / 5 mm
Max. permissible relative humidity (operation)
≤ 100 % (at 25 °C, non-condensing)
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
Static Boost (IStat.Boost)
25 A
Derating
> 60 °C ... 70 °C (2.5%/K)
Output power
480 W
Typical response time
300 ms (from SLEEP MODE)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section AWG min.
24
Standard - Safety of transformers
EN 61558-2-16
Explosive atmosphere
IEC 60079-0
CSA
CAN/CSA-C22.2 No. 60950-1-07
Conducted noise emission
EN 55016
ECLASS 6.0
27049000
Recommended breaker for input protection
10 A ... 16 A (Characteristic B, C, D, K or comparable)
Nominal output current (IN)
20 A
Test level 5
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Depth
125 mm
Ambient temperature (operation)
-40 °C ... 75 °C (> 60 °C Derating: 2.5 %/K)
Degree of pollution
2
AC frequency range
50 Hz ... 60 Hz -10 % ... +10 %
Mains buffering time
typ. 36 ms (120 V AC)
Connection in parallel
Yes, for redundancy and increased capacity
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
Power loss nominal load max.
< 38 W (120 V AC)
Protection class
I
Conductor cross section solid max.
1 mm²
Stripping length
8 mm
Standard - Electrical safety
IEC 61010-2-201 (SELV)
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
UL approvals
UL Listed UL 508
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Residual ripple
< 30 mVPP (with nominal values)
Net weight
1.3 kg
Insulation voltage input/output
4 kV AC (type test)
Assembly instructions
Alignable: horizontally 0 mm at Pout <50% PN, 5 mm at Pout ≥50% PN, next to active components 15 mm, vertically 50 mm
Conductor cross section flexible min.
0.2 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Mains variation/undervoltage
SEMI F47-0706, EN 61000-4-11
SIQ
BG (type approved)
Noise emission
EN 55016
Flicker
EN 61000-3-3
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Voltage dips
EN 61000-4-11
Pulse-shape magnetic field
EN 61000-4-9
Electrostatic discharge
EN 61000-4-2
Contact discharge
8 kV (Test Level 4)
Input
2 kV (Test Level 4 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Damped oscillating magnetic field
EN 61000-4-10
Test level 3
1.5 kHz 15 kHz (Test Level 4)
Input, output (test level 2)
10 MHz
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 7.0
27049002
Discharge in air
15 kV (Test Level 4)
Comments
Criterion A
Signal
4 kV (Test Level 4 - asymmetrical)
Voltage
2.5 kV
Number of periods
0,5 / 1 / 5 / 50 / 250 periods
Attenuated oscillating wave
EN 61000-4-18
Input, output (test level 3)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
ETIM 6.0
EC002540
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Discharge current to PE
< 3.5 mA
Input fuse
12 A (slow-blow, internal)
Nominal input voltage range
100 V AC ... 240 V AC
Climatic class
3K3 (in acc. with EN 60721)
Width with alternative assembly
122 mm
Installation height
≤ 5000 m (> 2000 m, observe derating)
Dielectric strength maximum
300 V AC 60 s
Current consumption
6.8 A (100 V AC)
Shipbuilding approval
DNV GL applied for
Harmonic currents
EN 61000-3-2
Additional text
Test Level 2
DNV GL noise radiation
Class B
Fast transients (burst)
EN 61000-4-4
Test level 1
15 Hz 150 Hz (Test Level 4)
Test level 2
150 Hz 1.5 kHz (Test Level 4)
Test level 6
150 Hz 180 Hz (Test Level 4)
REACh SVHC
Lead 7439-92-1
Height with alternative assembly
130 mm
Installation distance top/bottom
50 mm / 50 mm
Protective circuit/component
Varistor, gas-filled surge arrester
EMC requirements, power plant
IEC 61850-3
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
110 A/m
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Test level 4
15 kHz 150 kHz (Test Level 4)
Asymmetrical conducted disturbance variables
EN 61000-4-16
Input, output (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Signals (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 10.0.1
27040701
ECLASS 9.0
27040701
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Inrush current
typ. 10 A (at 25 °C)
Nominal output voltage
24 V DC
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (constant capacity)
HART FSK Physical Layer Test Specification Compliance
Output voltage UOut compliant
Degree of protection
IP20
Width
70 mm
Depth with alternative assembly
73 mm
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Rail applications
EN 50121-3-2
DNV GL conducted interference
Class A
Frequency range
50 Hz ... 60 Hz
Surge voltage load (surge)
EN 61000-4-5
I/O/S
asymmetrical
Frequency
50 Hz
Voltage dip
0 %
Signals (test level 2)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
ECLASS 11.0
27040701
ETIM 7.0
EC002540