2904625 Phoenix Contact AC/DC Power Supplies

Product Details

• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Nominal input voltage range
  100 V AC ... 240 V AC
• AC frequency range
  50 Hz ... 60 Hz -10 % ... +10 %
• Nominal power consumption
  274 VA
• Mains buffering time
  typ. 42 ms (120 V AC)
• Dynamic Boost (IDyn.Boost)
  20 A (5 s)
• Connection in series
  yes
• Residual ripple
  < 80 mVPP (with nominal values)
• Power loss nominal load max.
  < 20 W (120 V AC)
• Insulation voltage output / PE
  0.5 kV DC (type test)
• Connection method
  Push-in connection
• Conductor cross section AWG max.
  16
• Standard – Safety extra-low voltage
  IEC 61010-1 (SELV)
• CSA
  CAN/CSA-C22.2 No. 60950-1-07
• Additional text
  Test Level 2
• Harmonic currents
  EN 61000-3-2
• Signal
  4 kV (Test Level 4 - asymmetrical)
• Surge voltage load (surge)
  EN 61000-4-5
• Frequency
  50 Hz
• Attenuated sinusoidal oscillations (ring wave)
  EN 61000-4-12
Test level 5
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Input, output (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
Installation distance top/bottom
50 mm / 50 mm
Degree of pollution
2
Discharge current to PE
< 3.5 mA
Input fuse
8 A (slow-blow, internal)
Protective circuit/component
Varistor, gas-filled surge arrester
Static Boost (IStat.Boost)
12.5 A
Derating
> 60 °C (2.5%/K)
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Environmental protection directive
RoHS Directive 2011/65/EU
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Standard - Safe isolation
IEC 61010-2-201
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Contact discharge
8 kV (Test Level 4)
Test field strength
100 A/m
Input
2 kV (Test Level 4 - symmetrical)
I/O/S
asymmetrical
Voltage dip
0 %
Test level 1
15 Hz 150 Hz (Test Level 4)
Attenuated oscillating wave
EN 61000-4-18
Input, output (test level 3)
Test Level 3 - asymmetrical
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 11.0
27040701
Depth
125 mm
Depth with alternative assembly
53 mm
Degree of protection
IP20
Max. permissible relative humidity (operation)
≤ 100 % (at 25 °C, non-condensing)
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
Current consumption
3.4 A (100 V AC)
Recommended breaker for input protection
10 A ... 16 A (Characteristic B, C, D, K or comparable)
Power factor (cos phi)
0.94
Setting range of the output voltage (USet)
24 V DC ... 29.5 V DC (constant capacity)
Connection in parallel
Yes, for redundancy and increased capacity
Typical response time
300 ms (from SLEEP MODE)
Efficiency
typ. 92.5 % (120 V AC)
Insulation voltage input / PE
3.5 kV AC (type test)
Conductor cross section solid max.
1 mm²
Stripping length
8 mm
HART FSK Physical Layer Test Specification Compliance
Output voltage UOut compliant
Mains variation/undervoltage
SEMI F47-0706, EN 61000-4-11
Shipbuilding approval
DNV GL, PRS, BV, LR, ABS
DNV GL conducted interference
Class A
Discharge in air
15 kV (Test Level 4)
Comments
Criterion A
Power frequency magnetic field
EN 61000-4-8
Number of periods
0,5 / 1 / 5 / 50 / 250 periods
Test level 3
1.5 kHz 15 kHz (Test Level 4)
Test level 4
15 kHz 150 kHz (Test Level 4)
REACh SVHC
Lead 7439-92-1
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Installation distance right/left
5 mm / 5 mm
Ambient temperature (start-up type tested)
-40 °C
Installation height
≤ 5000 m (> 2000 m, observe derating)
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Inrush current
typ. 12 A (at 25 °C)
Type of protection
Transient surge protection
Nominal output voltage
24 V DC
Selective Fuse Breaking (ISFB)
60 A (15 ms)
Feedback voltage resistance
≤ 35 V DC
Maximum power dissipation in no-load condition
< 3 W (120 V AC)
Net weight
0.9 kg
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section solid min.
0.2 mm²
EMC requirements for noise emission
EN 61000-6-3
Standard - Electrical safety
IEC 61010-2-201 (SELV)
Rail applications
EN 50121-3-2
SIQ
BG (type approved)
Noise emission
EN 55016
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Voltage
2.5 kV
Test level 2
150 Hz 1.5 kHz (Test Level 4)
Input, output (test level 2)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Test level 6
16.7 Hz 50 Hz 60 Hz (Test Level 4)
ECLASS 9.0
27040701
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
Output power
240 W
MTBF (IEC 61709, SN 29500)
> 1251000 h (25 °C)
Protection class
I
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section AWG min.
24
Standard - Safety of transformers
IEC 61558-2-16 pending
EMC requirements, power plant
IEC 61850-3
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
UL approvals
UL Listed UL 508
Conducted noise emission
EN 55016
DNV GL noise radiation
Class B
Frequency range
50 Hz ... 60 Hz
Output
1 kV (Test Level 3 - symmetrical)
Voltage dips
EN 61000-4-11
Pulse-shape magnetic field
EN 61000-4-9
Damped oscillating magnetic field
EN 61000-4-10
Asymmetrical conducted disturbance variables
EN 61000-4-16
Signals (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Signals (test level 2)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Height
130 mm
Height with alternative assembly
130 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Climatic class
3K3 (in acc. with EN 60721)
Dielectric strength maximum
300 V AC 60 s
Nominal output current (IN)
10 A
Flicker
EN 61000-3-3
Width
50 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Width with alternative assembly
122 mm
Conductor cross section flexible max.
1.5 mm²