2904957 Phoenix Contact Electrical Safety Devices

Product Details

• Width
  6.8 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Rated control circuit supply voltage US
  24 V DC -15 % / +10 %
• Input voltage range "0" signal
  0 V DC ... 5 V DC (for safe Off; at S12)
• Input voltage range "1" signal
  20.4 V DC ... 26.4 V DC
• Limiting continuous current
  6 A (observe derating)
• Switching frequency
  max. 0.5 Hz
• Current
  max. 100 mA
• Typical response time at US
  < 175 ms
• Recovery time
  < 500 ms
• Min. degree of protection of inst. location
  IP54
• Status display
  2 x green LEDs
• Stripping length
  12 mm
• Stop category
  0
• Rated insulation voltage
  250 V AC
• ECLASS 10.0.1
  27371819
• ECLASS 5.0
  27371900
• ECLASS 7.0
  27371819
• UNSPSC 20.0
  39122205
• Depth
  102.5 mm
Maximum altitude
≤ 2000 m (Above sea level)
Power consumption at US
typ. 1 W
Input name
Start circuit
Max. permissible overall conductor resistance
150 Ω
Protective circuit/component
Suppressor diode
Contact type
1 enabling current path
Switching capacity
min. 60 mW
Voltage
22 V DC (Us - 2 V)
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Typical release time at US
< 20 ms (when controlled via A1 or S12 and S13.)
Degree of protection
IP20
Operating voltage display
1 x green LED
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Screw thread
M3
Safety Integrity Level Claim Limit (SIL CL)
3
Degree of pollution
2
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 4.0
40020600
ETIM 6.0
EC001449
ETIM 7.0
EC001449
Height
93.1 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Inrush current
min. 3 mA
Protective circuit
Surge protection Suppressor diode
Number of inputs
1
Output description
non-safety-related
Contact material
AgSnO2
Output fuse
6 A gL/gG (N/O contact)
Short-circuit protection
no
Mounting type
DIN rail mounting
pluggable
no
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Standards/regulations
DIN EN 50178
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6 kV between input circuit and enabling current pathBasic insulation 4 kV between all current paths and housing
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
40020600
ECLASS 9.0
27371819
UNSPSC 21.0
39122205
Ambient temperature (operation)
-40 °C ... 60 °C (observe derating)
Rated control supply current IS
typ. 42 mA
Description of the input
non-safety-related
Input current range "0" signal
0 mA ... 2 mA (for safe Off; at S12)
Number of outputs
1 (digital, PNP)
Sq. Total current
36 A2 (observe derating)
Typical pickup time at US
< 250 ms (when controlled via A1)
Net weight
69 g
Housing material
PBT
Conductor cross-section AWG
24 ... 12
Performance level (PL)
e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
Overvoltage category
III
Shock
15g
China RoHS
Environmentally Friendly Use Period = 50 years
UNSPSC 13.2
39121501
UNSPSC 19.0
39122205
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Designation
Air clearances and creepage distances between the power circuits
Filter time
max. 1.5 ms (at S12, S13; test pulse width)
Current consumption
< 10 mA
Output name
Enabling current path
Switching voltage
min. 12 V AC/DC
Mechanical service life
10x 106 cycles
Nominal operating mode
100% operating factor
Mounting position
vertical or horizontal
Housing color
yellow
Connection method
Screw connection
Safety Integrity Level (SIL)
3
Category
4
Conformance
CE-compliant
ECLASS 11.0
27371819
ECLASS 5.1
27371900
ECLASS 6.0
27371800
UNSPSC 18.0
39122205