3044814 Phoenix Contact Terminal Blocks

Product Details

• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  27141100
• ETIM 3.0
  EC000901
• ETIM 7.0
  EC000897
• UNSPSC 20.0
  39121410
• Test duration per axis
  5 h
• Insulating material group
  I
• Nominal voltage UN
  800 V
• Bending test rotation speed
  10 rpm
• Tight fit on carrier
  NS 35
• Setpoint
  1 N
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Number of shocks per direction
  3
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Conductor cross section solid min.
  0.14 mm²
• Conductor cross section AWG min.
  26
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Internal cylindrical gage
A4
Permissible humidity (storage/transport)
30 % ... 70 %
Area of application
Railway industry
Overvoltage category
III
Power frequency withstand voltage setpoint
2 kV
Result of temperature-rise test
Test passed
Result of tight fit on support
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
65 mm
Height NS 35/15
72.5 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Stripping length
9 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Rated surge voltage
8 kV
Maximum load current
36 A (with 6 mm² conductor cross section)
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section solid max.
6 mm²
Tightening torque, min
0.6 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000897
Degree of pollution
3
Nominal current IN
30 A
Bending test turns
135
Short circuit stability result
Test passed
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
6.2 mm
Connection method
Screw connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Tightening torque max
0.8 Nm
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
UNSPSC 12.01
39121410
UNSPSC 7.0901
39121410
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
69.9 mm
Conductor cross section AWG max.
10
Conductor cross section flexible max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 2.0
EC000901
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 4.0
27141100
ETIM 4.0
EC000897
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
Number of levels
2
Back of the hand protection
guaranteed
Result of thermal test
Test passed
Flammability rating according to UL 94
V0
Color
gray
Connection in acc. with standard
CSA
Test directions
X-, Y- and Z-axis (pos. and neg.)
Screw thread
M3
UNSPSC 11
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
UNSPSC 18.0
39121410
Nominal cross section
4 mm²
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Open side panel
Yes
Insulating material
PA
Finger protection
guaranteed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
UNSPSC 19.0
39121410
Number of connections
4
Short-time current
0.48 kA