3044160 Phoenix Contact Terminal Blocks

Product Details

• Result of temperature-rise test
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Length
  47.7 mm
• ECLASS 10.0.1
  27141120
• Note
  Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ETIM 2.0
  EC000897
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Conductor cross section flexible max.
  16 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.5 mm²
• UNSPSC 21.0
  39121410
• UNSPSC 11
  39121410
• ETIM 3.0
  EC000897
• UNSPSC 6.01
  30211811
• UNSPSC 7.0901
  39121410
• UNSPSC 20.0
  39121410
• 2 conductors with same cross section, stranded max.
  4 mm²
• China RoHS
  Environmentally Friendly Use Period = 50 years
• UNSPSC 19.0
  39121410
UNSPSC 13.2
39121410
Rated surge voltage
8 kV
Nominal voltage UN
1000 V
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Maximum load current
76 A (with 16 mm² conductor cross section)
Open side panel
Yes
Surge voltage test setpoint
9.6 kV
Tensile test result
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Screw thread
M4
Tightening torque, min
1.5 Nm
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Conductor cross section short circuit testing
10 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test directions
X-, Y- and Z-axis (pos. and neg.)
Degree of pollution
3
Nominal current IN
57 A
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
55 mm
Connection method
Screw connection
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
10.2 mm
Height
46.9 mm
Stripping length
10 mm
Conductor cross section flexible min.
0.5 mm²
Short-time current
1.2 kA
Acceleration
30g
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
CSA
Conductor cross section solid min.
0.5 mm²
ECLASS 11.0
27141120
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Internal cylindrical gage
A6
Tightening torque max
1.8 Nm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
ECLASS 5.1
27141100
Max. AWG conductor cross section, flexible
6
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 9.0
27141120
Potentials
1
Area of application
Railway industry
Bending test turns
135
Test spectrum
Service life test category 2, bogie-mounted
End cover width
2.2 mm
Flammability rating according to UL 94
V0
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Maximum power dissipation for nominal condition
1.82 W
Tractive force setpoint
100 N
Setpoint
5 N
Number of levels
1
Color
gray
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Tight fit on carrier
NS 35
Conductor cross section tensile test
16 mm²
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Height NS 35/7,5
47.5 mm
Conductor cross section AWG min.
20
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
Insulating material group
I
Conductor cross section solid max.
16 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Nominal cross section
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
6 mm²
Insulating material
PA
2 conductors with same cross section, solid max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
Number of connections
2
Min. AWG conductor cross section, flexible
20
2 conductors with same cross section, solid min.
0.5 mm²
Overvoltage category
III
ETIM 4.0
EC000897