2904374 Phoenix Contact AC/DC Power Supplies

Product Details

• Height
  90 mm
• Degree of protection
  IP20
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Current consumption
  0.53 A (100 V AC)
• Input fuse
  2 A (slow-blow, internal)
• Protective circuit/component
  Varistor
• Feedback voltage resistance
  < 10 V DC
• Output power
  25 W
• MTBF (IEC 61709, SN 29500)
  > 2174000 h (40 °C)
• Connection method
  Screw connection
• Conductor cross section solid min.
  0.2 mm²
• Installation distance right/left
  0 mm / 0 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
• Nominal input voltage range
  100 V AC ... 240 V AC
• Power factor (cos phi)
  0.47
• Type of protection
  Transient surge protection
• Control deviation
  < 1 % (change in load, static 10 % ... 90 %)
• Power loss nominal load max.
  < 4.5 W
• Housing material
  Polycarbonate
• Assembly instructions
  alignable: 0 mm horizontally, 30 mm vertically
Conductor cross section flexible max.
2.5 mm²
Screw thread
M3
EMC requirements for noise emission
EN 61000-6-3
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
CSA
CAN/CSA-C22.2 No. 60950-1-07
Contact discharge
6 kV (Test Level 3)
Discharge in air
8 kV (Test Level 3)
Test field strength
10 V/m
Fast transients (burst)
EN 61000-4-4
Voltage
10 V (Test Level 3)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 11.0
27040701
ECLASS 5.1
27049000
ECLASS 7.0
27049002
ECLASS 9.0
27040701
UNSPSC 13.2
39121004
UNSPSC 20.0
39121004
Depth
84 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Frequency range (fN)
50 Hz ... 60 Hz 10 %
Mains buffering time
> 35 ms (120 V AC)
Nominal output current (IN)
5 A (-25 °C ... 55 °C)
Residual ripple
< 40 mVPP (with nominal values)
Typical response time
< 1 s
Efficiency
typ. 85 % (120 V AC)
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section AWG min.
24
Conductor cross section AWG max.
14
Standard - Safety of transformers
EN 61558-2-16
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Width
22.5 mm
Installation distance top/bottom
30 mm / 30 mm
Degree of pollution
2
Input voltage range
85 V AC ... 264 V AC
Inrush current
< 30 A (typical)
Nominal output voltage
5 V DC ±1 %
Derating
55 °C ... 70 °C (2.5%/K)
Maximum power dissipation in no-load condition
< 0.3 W
Protection class
II (in closed control cabinet)
Foot latch material
POM (Polyoxymethylen)
Conductor cross section solid max.
2.5 mm²
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Climatic class
3K3 (in acc. with EN 60721)
Nominal power consumption
61.7 VA
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Connection in parallel
Yes, for redundancy and increased capacity
Connection in series
yes
Protection against overvoltage at the output (OVP)
≤ 10 V DC
Net weight
0.15 kg
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Stripping length
8 mm
EMC requirements for noise immunity
EN 61000-6-1
Mains variation/undervoltage
EN 61000-4-11
Standard - Safe isolation
DIN VDE 0100-410
UL approvals
UL/C-UL listed UL 508
Electrostatic discharge
EN 61000-4-2
Output
1 kV (Test Level 2 - symmetrical)
Voltage dips
EN 61000-4-11
UNSPSC 18.0
39121004
ETIM 4.0
EC000599
UNSPSC 19.0
39121004
Electromagnetic HF field
EN 61000-4-3
Comments
Criterion A
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Criterion A
Normal operating behavior within the specified limits.
ECLASS 4.0
27040700
ECLASS 5.0
27049000
ETIM 7.0
EC002540
UNSPSC 21.0
39121004
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Frequency range
10 kHz ... 80 MHz
Input
2 kV (Test Level 3 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Conducted interference
EN 61000-4-6
ECLASS 10.0.1
27040701
ECLASS 4.1
27040700
ECLASS 6.0
27049000
ETIM 6.0
EC002540