2904597 Phoenix Contact AC/DC Power Supplies

Product Details

• Test field strength
  1000 A/m
• Width
  22.5 mm
• Installation distance top/bottom (passive)
  30 mm / 30 mm (POut ≥50% )
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Frequency range (fN)
  50 Hz ... 60 Hz -10 % ... +10 %
• Inrush current
  typ. 5.9 A (at 25 °C)
• Dynamic Boost (IDyn.Boost)
  2.6 A (≤ 60 °C (5 s))
• Protection against overvoltage at the output (OVP)
  ≤ 32 V DC
• Output power
  30 W
• Net weight
  0.188 kg
• Assembly instructions
  DIN rail mounting
• Connection method
  Screw connection
• Conductor cross section AWG max.
  14
• Standard - safety for equipment for measurement, control, and laboratory use
  IEC 61010-1
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• Contact discharge
  8 kV (Test Level 4)
• Comments
  Criterion A
• Output
  1 kV (Test Level 3 - symmetrical)
• I/O/S
  asymmetrical
• Voltage dip
  0 %
Number of periods
0.5 / 1 / 5 / 50 periods
ECLASS 10.0.1
27040701
ECLASS 9.0
27040701
UNSPSC 19.0
39121004
Depth
90 mm
Installation distance top/bottom (active)
30 mm / 30 mm (POut ≥50% )
Ambient temperature (start-up type tested)
-40 °C
Installation height
≤ 5000 m (> 2000 m, observe derating)
Current consumption
0.46 A (100 V AC)
Protective circuit/component
Varistor
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (constant capacity)
Connection in series
yes
Typical response time
500 ms
Environmental protection directive
RoHS Directive 2011/65/EU
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section flexible max.
2.5 mm²
Standard - Electrical safety
IEC 61010-2-201 (SELV)
Standard - power supply devices for low voltage with DC output
EN 61204-3
Conducted noise emission
EN 55016
Conducted interference
EN 61000-4-6
Frequency
60 Hz
Test level 1
16.67 Hz 50 Hz 60 Hz (Test Level 2)
Test level 2
16.67 Hz 50 Hz 60 Hz (Test Level 4)
China RoHS
Environmentally Friendly Use Period = 25;
UNSPSC 13.2
39121004
Height
99 mm
Installation distance right/left (active)
15 mm / 15 mm (POut ≥50% )
Degree of protection
IP20
Degree of pollution
2
Dielectric strength maximum
300 V AC 30 s
Mains buffering time
typ. 43 ms (120 V AC)
Type of protection
Transient surge protection
Static Boost (IStat.Boost)
1.625 A (≤ 40 °C)
Feedback voltage resistance
≤ 35 V DC
Residual ripple
< 40 mVPP (with nominal values)
Power loss nominal load max.
< 3.7 W (120 V AC)
Efficiency
typ. 89.2 % (120 V AC)
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG min.
26
Standard - Safety of transformers
EN 61558-2-16
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
ECLASS 5.1
27242213
SIQ
CB-Scheme (IEC 61010-1, IEC 61010-2-201)
Discharge in air
8 kV (Test Level 3)
Frequency range
50 Hz ... 60 Hz
Fast transients (burst)
EN 61000-4-4
Additional text
Test Level 2
Pulse-shape magnetic field
EN 61000-4-9
Asymmetrical conducted disturbance variables
EN 61000-4-16
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ETIM 6.0
EC002540
ETIM 7.0
EC002540
Installation distance top/bottom (active, passive)
30 mm / 30 mm (POut ≤50 %)
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
Input fuse
3.15 A (slow-blow, internal)
Nominal output voltage
24 V DC
Nominal output current (IN)
1.3 A
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
MTBF (IEC 61709, SN 29500)
> 1904000 h (25 °C)
Conductor cross section flexible min.
0.14 mm²
EMC requirements for noise emission
EN 61000-6-3
Standard - Safe isolation
IEC 61558-2-16
UL approvals
UL Listed UL 61010-1
Noise emission
EN 55016
Signal
0.5 kV (Test Level 2 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Voltage dips
EN 61000-4-11
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040701
ECLASS 7.0
27049002
UNSPSC 20.0
39121004
ECLASS 6.0
27049000
Installation distance right/left (passive)
5 mm / 5 mm (POut ≥50% )
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Climatic class
3K3 (in acc. with EN 60721)
Discharge current to PE
< 0.25 mA (264 V AC, 60 Hz)
Nominal power consumption
37 VA
Recommended breaker for input protection
6 A ... 16 A (Characteristic B, C or comparable)
Derating
> 60 °C (2.5%/K)
Connection in parallel
Yes, for redundancy and increased capacity
Maximum power dissipation in no-load condition
< 0.4 W (230 V AC)
Protection class
II
Conductor cross section solid min.
0.14 mm²
Stripping length
8 mm
EMC requirements for noise immunity
EN 61000-6-1
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Input
2 kV (symmetrical)
Voltage
300 V (1 s)
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Criterion A
Normal operating behavior within the specified limits.
UNSPSC 18.0
39121004
UNSPSC 21.0
39121004