2904620 Phoenix Contact AC/DC Power Supplies
Part#:2904620
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 30
Dec 22, 2024
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/5 A
About the manufacturer: Phoenix Contact is one of the manufacturers that offers AC/DC Power Supplies that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2904620 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Height with alternative assembly 130 mm
- Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
- Installation height ≤ 5000 m (> 2000 m, observe derating)
- Frequency range (fN) 50 Hz ... 60 Hz -10 % ... +10 %
- Mains buffering time typ. 34 ms (3x 400 V AC)
- Setting range of the output voltage (USet) 24 V DC ... 29.5 V DC (constant capacity)
- Derating > 60 °C ... 70 °C (2.5%/K)
- Residual ripple < 30 mVPP (with nominal values)
- Environmental protection directive RoHS Directive 2011/65/EU
- MTBF (IEC 61709, SN 29500) > 1560000 h (25 °C)
- Mounting position horizontal DIN rail NS 35, EN 60715
- Conductor cross section AWG max. 16
- EMC requirements for noise immunity EN 61000-6-1
- HART FSK Physical Layer Test Specification Compliance Output voltage UOut compliant
- Standard - Safe isolation IEC 61558-2-16 pending
- SIQ BG (type approved)
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- DNV GL conducted interference Class A
- Flicker EN 61000-3-3
- Contact discharge 8 kV (Test Level 4)
- Test field strength 110 A/m
- Conducted interference EN 61000-4-6
- Number of periods 0,5 / 1 / 5 / 50 / 250 periods
- Attenuated sinusoidal oscillations (ring wave) EN 61000-4-12
- Height 130 mm
- Installation distance right/left 5 mm / 5 mm
- Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
- Degree of pollution 2
- AC frequency range 50 Hz ... 60 Hz -10 % ... +10 %
- Nominal power consumption 283 VA
- Recommended breaker for input protection 3x 6 A (Characteristic B, C or comparable)
- Nominal output voltage 24 V DC
- Static Boost (IStat.Boost) 6.25 A
- Connection in parallel Yes, for redundancy and increased capacity
- Power loss nominal load max. < 15 W (400 V AC)
- Insulation voltage input / PE 3.5 kV AC (type test)
- Assembly instructions alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
- Conductor cross section solid max. 1 mm²
- Stripping length 8 mm
- Standard - Electrical safety IEC 61010-2-201 (SELV)
- Standard – Limitation of mains harmonic currents EN 61000-3-2
- Rail applications EN 50121-3-2
- CSA CAN/CSA-C22.2 No. 60950-1-07
- Conducted noise emission EN 55016
- Electrostatic discharge EN 61000-4-2
- Discharge in air 15 kV (Test Level 4)
- Frequency range 50 Hz ... 60 Hz
- Output 1 kV (Test Level 3 - symmetrical)
- Power frequency magnetic field EN 61000-4-8
- Pulse-shape magnetic field EN 61000-4-9
- Asymmetrical conducted disturbance variables EN 61000-4-16
- Test level 5 16.7 Hz 50 Hz 60 Hz (Test Level 4)
- Signals (test level 1) 100 kHz 1 MHz (Test Level 3 - symmetrical)
- Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
- ECLASS 11.0 27040701
- ECLASS 9.0 27040701
- ETIM 6.0 EC002540
- Depth 125 mm
- Installation distance top/bottom 50 mm / 50 mm
- Climatic class 3K3 (in acc. with EN 60721)
- Input voltage range 3x 400 V AC ... 500 V AC -20 % ... +10 %
- Input fuse 2 A (slow-blow, internal)
- Protective circuit/component Varistor, gas-filled surge arrester
- Selective Fuse Breaking (ISFB) 30 A (15 ms)
- Control deviation < 0.5 % (Static load change 10 % ... 90 %)
- Typical response time 300 ms (from SLEEP MODE)
- Insulation voltage input/output 4 kV AC (type test)
- Connection method Push-in connection
- Conductor cross section AWG min. 24
- Standard – Safety extra-low voltage IEC 61010-1 (SELV)
- Standard - power supply devices for low voltage with DC output EN 61204-3
- Mains variation/undervoltage SEMI F47-0706, EN 61000-4-11
- Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
- Noise emission EN 55016
- Additional text Test Level 2
- Electromagnetic HF field EN 61000-4-3
- Fast transients (burst) EN 61000-4-4
- Surge voltage load (surge) EN 61000-4-5
- Voltage 2.5 kV
- Voltage dip 0 %
- Test level 4 15 kHz 150 kHz (Test Level 4)
- Signals (test level 2) 100 kHz 1 MHz (Test Level 3 - asymmetrical)
- ECLASS 10.0.1 27040701
- UNSPSC 21.0 39121004
- Width 36 mm
- Depth with alternative assembly 39 mm
- Ambient temperature (start-up type tested) -40 °C
- Nominal input voltage range 3x 400 V AC ... 500 V AC
- Current consumption 3x 0.53 A (400 V AC)
- Inrush current typ. 11 A (at 25 °C)
- Type of protection Transient surge protection
- Nominal output current (IN) 5 A
- Connection in series yes
- Feedback voltage resistance ≤ 35 V DC
- Output power 120 W
- Net weight 0.6 kg
- Insulation voltage output / PE 0.5 kV DC (type test)
- Conductor cross section flexible max. 1.5 mm²
- EMC requirements, power plant IEC 61850-3
- Frequency 50 Hz
- Damped oscillating magnetic field EN 61000-4-10
- Attenuated oscillating wave EN 61000-4-18
- Input, output (test level 1) 100 kHz 1 MHz (Test Level 3 - symmetrical)
- China RoHS Environmentally Friendly Use Period = 25;
- ECLASS 5.1 27242213
- UNSPSC 20.0 39121004
- Width with alternative assembly 122 mm
- Degree of protection IP20
- Nominal input voltage 3 V
- Discharge current to PE < 3.5 mA
- Power factor (cos phi) 0.48
- Dynamic Boost (IDyn.Boost) 10 A (5 s)
- Protection against overvoltage at the output (OVP) ≤ 32 V DC
- Maximum power dissipation in no-load condition < 3 W (400 V AC)
- Efficiency typ. 89 % (400 V AC)
- Protection class I
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section flexible min. 0.2 mm²
- EMC requirements for noise emission EN 61000-6-3
- Standard - Safety of transformers IEC 61558-2-16 pending
- Standard - safety for equipment for measurement, control, and laboratory use IEC 61010-1
- UL approvals UL Listed UL 508
- Shipbuilding approval DNV GL, PRS, BV, LR, ABS
- Harmonic currents EN 61000-3-2
- DNV GL noise radiation Class B
- Comments Criterion A
- Input 3 kV (Test Level 4 - symmetrical)
- Signal 1 kV (Test Level 2 - asymmetrical)
- I/O/S asymmetrical
- Voltage dips EN 61000-4-11
- Test level 1 15 Hz 150 Hz (Test Level 4)
- Test level 3 1.5 kHz 15 kHz (Test Level 4)
- Test level 6 16.7 Hz 50 Hz 60 Hz (Test Level 4)
- Criterion A Normal operating behavior within the specified limits.
- REACh SVHC Lead 7439-92-1
- UNSPSC 18.0 39121004
- Test level 2 150 Hz 1.5 kHz (Test Level 4)
- Input, output (test level 2) 10 MHz
- Input, output (test level 3) 100 kHz 1 MHz (Test Level 3 - asymmetrical)
- Criterion C Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
- ECLASS 6.0 27049005
- UNSPSC 13.2 39121004
- UNSPSC 19.0 39121004
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$247.13
Stock:
30
Select Qty:
$247.13
$247.13 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨