2904610 Phoenix Contact AC/DC Power Supplies

Product Details

• Depth with alternative assembly
  53 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of pollution
  2
• Input voltage range
  100 V AC ... 240 V AC -15 % ... +10 %
• Current consumption
  3.4 A (100 V AC)
• Mains buffering time
  typ. 43 ms (120 V AC)
• Protective circuit/component
  Varistor, gas-filled surge arrester
• Nominal output voltage
  48 V DC
• Static Boost (IStat.Boost)
  6.25 A
• Residual ripple
  < 70 mVPP (with nominal values)
• Maximum power dissipation in no-load condition
  < 3 W (120 V AC)
• Efficiency
  typ. 92.3 % (120 V AC)
• Insulation voltage output / PE
  0.5 kV DC (type test)
• Depth
  125 mm
• Installation distance right/left
  5 mm / 5 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Climatic class
  3K3 (in acc. with EN 60721)
• Dielectric strength maximum
  300 V AC 60 s
• Discharge current to PE
  < 3.5 mA
• Type of protection
  Transient surge protection
Width with alternative assembly
122 mm
Installation distance top/bottom
50 mm / 50 mm
Degree of protection
IP20
Installation height
≤ 5000 m (> 2000 m, observe derating)
AC frequency range
50 Hz ... 60 Hz -10 % ... +10 %
Nominal power consumption
271 VA
Recommended breaker for input protection
10 A ... 16 A (Characteristic B, C, D, K or comparable)
Selective Fuse Breaking (ISFB)
30 A (15 ms)
Derating
> 60 °C ... 70 °C (2.5%/K)
Connection in parallel
Yes, for redundancy and increased capacity
Protection against overvoltage at the output (OVP)
≤ 60 V DC
Power loss nominal load max.
< 19 W (120 V AC)
Environmental protection directive
RoHS Directive 2011/65/EU
Protection class
I
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section AWG min.
24
Standard - Safety of transformers
EN 61558-2-16
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Standard - Safe isolation
IEC 61558-2-16
UL approvals
UL Listed UL 508
Conducted noise emission
EN 55016
Frequency range
50 Hz ... 60 Hz
Fast transients (burst)
EN 61000-4-4
Signal
4 kV (Test Level 4 - asymmetrical)
I/O/S
asymmetrical
Voltage dips
EN 61000-4-11
Damped oscillating magnetic field
EN 61000-4-10
Asymmetrical conducted disturbance variables
EN 61000-4-16
Input, output (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
Width
50 mm
Height with alternative assembly
130 mm
Ambient temperature (start-up type tested)
-40 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Nominal input voltage range
100 V AC ... 240 V AC
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Inrush current
typ. 16 A (at 25 °C)
Input fuse
8 A (slow-blow, internal)
Nominal output current (IN)
5 A
Connection in series
yes
Output power
240 W
Typical response time
300 ms (from SLEEP MODE)
Insulation voltage input/output
4 kV AC (type test)
Connection method
Push-in connection
Conductor cross section flexible min.
0.2 mm²
Height
130 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.1
27049002
Setting range of the output voltage (USet)
48 V DC ... 56 V DC (constant capacity)
Dynamic Boost (IDyn.Boost)
10 A (5 s)
Feedback voltage resistance
≤ 60 V DC
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
Net weight
1 kg
MTBF (IEC 61709, SN 29500)
> 1242000 h (25 °C)
Insulation voltage input / PE
3.5 kV AC (type test)
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
EMC requirements for noise immunity
EN 61000-6-1
Stripping length
8 mm
Standard - Electrical safety
IEC 61010-2-201 (SELV)
Rail applications
EN 50121-3-2
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
8 kV (Test Level 4)
Flicker
EN 61000-3-3
Test field strength
110 A/m
Conducted interference
EN 61000-4-6
Voltage
2.5 kV
Voltage dip
0 %
Test level 2
150 Hz 1.5 kHz (Test Level 4)
Test level 3
1.5 kHz 15 kHz (Test Level 4)
Test level 6
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Signals (test level 2)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
REACh SVHC
Lead 7439-92-1
ETIM 6.0
EC002540
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section solid max.
1 mm²
EMC requirements for noise emission
EN 61000-6-3
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
CSA
CAN/CSA-C22.2 No. 60950-1-07
Harmonic currents
EN 61000-3-2
Electrostatic discharge
EN 61000-4-2
Input
2 kV (Test Level 4 - symmetrical)
Output
1 kV (Test Level 3 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Frequency
50 Hz
Number of periods
0,5 / 1 / 5 / 50 / 250 periods
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Attenuated oscillating wave
EN 61000-4-18
Input, output (test level 2)
10 MHz
Signals (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
ECLASS 10.0.1
27040701
ETIM 7.0
EC002540
Conductor cross section AWG max.
16
HART FSK Physical Layer Test Specification Compliance
Output voltage UOut compliant
EMC requirements, power plant
IEC 61850-3
Mains variation/undervoltage
SEMI F47-0706, EN 61000-4-11
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Noise emission
EN 55016
Discharge in air
15 kV (Test Level 4)
Electromagnetic HF field
EN 61000-4-3
Comments
Criterion A
Additional text
Test Level 2
Pulse-shape magnetic field
EN 61000-4-9
Test level 1
15 Hz 150 Hz (Test Level 4)
Test level 4
15 kHz 150 kHz (Test Level 4)
Test level 5
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Input, output (test level 3)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 11.0
27040701
ECLASS 9.0
27040701