2904611 Phoenix Contact AC/DC Power Supplies

Product Details

• Width with alternative assembly
  122 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal input voltage range
  100 V AC ... 240 V AC
• Discharge current to PE
  < 3.5 mA
• Inrush current
  typ. 11 A (at 25 °C)
• Nominal output current (IN)
  10 A
• Static Boost (IStat.Boost)
  12.5 A
• Typical response time
  300 ms (from SLEEP MODE)
• Efficiency
  typ. 94 % (120 V AC)
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Conductor cross section solid max.
  1 mm²
• EMC requirements, power plant
  IEC 61850-3
• Standard - Electrical safety
  IEC 61010-2-201 (SELV)
• Standard - safety for equipment for measurement, control, and laboratory use
  IEC 61010-1
• Conducted noise emission
  EN 55016
• Additional text
  Test Level 2
• Electrostatic discharge
  EN 61000-4-2
• Test field strength
  110 A/m
• Signal
  1 kV (Test Level 2 - asymmetrical)
Voltage
2.5 kV
Number of periods
0,5 / 1 / 5 / 50 / 250 periods
Depth
125 mm
Degree of protection
IP20
Ambient temperature (start-up type tested)
-40 °C
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
Current consumption
6.8 A (100 V AC)
Type of protection
Transient surge protection
Setting range of the output voltage (USet)
48 V DC ... 56 V DC (constant capacity)
Connection in series
yes
Output power
480 W
Environmental protection directive
RoHS Directive 2011/65/EU
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Standard - Safety of transformers
IEC 61558-2-16 pending
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
UL approvals
UL Listed UL 508
Rail applications
EN 50121-3-2
DNV GL conducted interference
Class A
Frequency range
50 Hz ... 60 Hz
Fast transients (burst)
EN 61000-4-4
Frequency
50 Hz
Test level 1
15 Hz 150 Hz (Test Level 4)
Test level 2
150 Hz 1.5 kHz (Test Level 4)
Test level 6
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Signals (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
REACh SVHC
Lead 7439-92-1
Width
70 mm
Depth with alternative assembly
73 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of pollution
2
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Input fuse
12 A (slow-blow, internal)
Protective circuit/component
Varistor, gas-filled surge arrester
Selective Fuse Breaking (ISFB)
60 A (15 ms)
Protection against overvoltage at the output (OVP)
≤ 60 V DC
Residual ripple
< 70 mVPP (with nominal values)
Power loss nominal load max.
< 36 W (120 V AC)
Insulation voltage output / PE
0.5 kV DC (type test)
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Stripping length
8 mm
EMC requirements for noise immunity
EN 61000-6-1
Mains variation/undervoltage
SEMI F47-0706, EN 61000-4-11
CSA
CAN/CSA-C22.2 No. 60950-1-07
Noise emission
EN 55016
DNV GL noise radiation
Class B
Discharge in air
15 kV (Test Level 4)
Input
2 kV (Test Level 4 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Power frequency magnetic field
EN 61000-4-8
Pulse-shape magnetic field
EN 61000-4-9
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Test level 4
15 kHz 150 kHz (Test Level 4)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
Height with alternative assembly
130 mm
Installation distance right/left
5 mm / 5 mm
Installation height
≤ 5000 m (> 2000 m, observe derating)
Dielectric strength maximum
300 V AC 60 s
Mains buffering time
typ. 32 ms (120 V AC)
Nominal output voltage
48 V DC
Derating
> 60 °C ... 70 °C (2.5%/K)
Feedback voltage resistance
≤ 60 V DC
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
Net weight
1.3 kg
MTBF (IEC 61709, SN 29500)
> 1100000 h (25 °C)
Protection class
I
Connection method
Push-in connection
Conductor cross section AWG max.
16
HART FSK Physical Layer Test Specification Compliance
Output voltage UOut compliant
Standard - Safe isolation
IEC 61558-2-16 pending
Shipbuilding approval
DNV GL, PRS, BV, LR, ABS
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Flicker
EN 61000-3-3
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Voltage dip
0 %
Test level 3
1.5 kHz 15 kHz (Test Level 4)
Input, output (test level 2)
10 MHz
Signals (test level 2)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 9.0
27040701
Height
130 mm
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Climatic class
3K3 (in acc. with EN 60721)
AC frequency range
50 Hz ... 60 Hz -10 % ... +10 %
Nominal power consumption
519 VA
Recommended breaker for input protection
10 A ... 16 A (Characteristic B, C, D, K or comparable)
Dynamic Boost (IDyn.Boost)
15 A (5 s)
Connection in parallel
Yes, for redundancy and increased capacity
Maximum power dissipation in no-load condition
< 5 W (120 V AC)
Insulation voltage input / PE
3.5 kV AC (type test)
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG min.
24
EMC requirements for noise emission
EN 61000-6-3
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Harmonic currents
EN 61000-3-2
Contact discharge
8 kV (Test Level 4)
Comments
Criterion A
I/O/S
asymmetrical
Voltage dips
EN 61000-4-11
Asymmetrical conducted disturbance variables
EN 61000-4-16
Test level 5
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Input, output (test level 3)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ETIM 6.0
EC002540
Damped oscillating magnetic field
EN 61000-4-10
Attenuated oscillating wave
EN 61000-4-18
Input, output (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040701
ETIM 7.0
EC002540