8BVI0014HCD0.000-1 B&R Electronic Components

Product Details

• Weight2.3 kg
• Certifications Functional safety
  Yes
• Certifications UL
  cULus E225616; Power conversion equipment
• OSSD signal connections
  Permitted ; Max. test pulse length: 500 µs
• Certifications EAC
  Yes
• Response threshold for open-circuit monitoring
  Approx. 0.25 A
• Discharge capacitance
  0.2 µF
• Pollution degree per EN 61800-5-1
  2 (non-conductive pollution)
• Degree of protection per EN 60529
  IP20
• Slots for plug-in modules
  2
• Input current at nominal voltage
  Approx. 30 mA
• Max. extinction energy per switching operation
  1.5 Ws
• Terminal cable cross section dimension of shield connection
  12 to 22 mm
• Response threshold for undervoltage monitoring
  24 VDC +0% / -4%
• Max. switching frequency
  0.5 Hz
• Continuous current
  1.1 A
• Max. internal resistance
  0.5 Ω
• Nominal switching frequency
  5 kHz
• Peak current per motor connection
  4.7 Aeff
• Variant
  ACOPOSmulti backplane
B&R ID code
0x253C
Continuous power consumption
2.91 kW
Output voltage
24 VDC +5.8% / -0%
Cooling and mounting type
Cold plate or pass-through mounting
Continuous current per motor connection
1.9 Aeff
Possible switching frequencies
5 / 10 / 20 kHz
Input voltage
25 VDC ±1.6%
Max. power consumption
16 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake(s)
Input capacitance
23.5 µF
Fuse protection
250 mA (slow-blow) electronic, automatic reset
Continuous power per motor connection
1.4 kW
DC bus capacitance
165 µF
Quantity
2
Dimensions Depth Cold plate
212 mm
Temperature Operation Nominal
5 to 40°C
Reduction of continuous current depending on switching frequency and mounting type Switching frequency 5 kHz Cold plate mounting
No reduction
Terminal connection cross section Approbation data UL/C-UL-US
30 to 10 AWG
Installation elevation above sea level Maximum
4000 m
Dimensions Height
317 mm
Temperature Transport
-25 to 70°C
Switching delay Rising edge
52 µs ±0.5 µs (digitally filtered)
Electrical isolation Input - Input
Yes
Variant U, V, W, PE
Connector
Protective measures Overload and short-circuit protection
Yes
Power dissipation depending on switching frequency Switching frequency 5 kHz
[1.2 * IM² + 2.62 * IM + 100] W
Certifications KC
Yes
Module width
1
Modulation compared to ground potential
Max. ±38 V
Overvoltage category per EN 61800-5-1
III
Circuit
Sink
Extinction potential
Approx. 30 V
Insulation stress of the connected motor per IEC TS 60034-25:2004
Limit value curve A
Max. output frequency
598 Hz
Dimensions Depth Pass-through mounting
209 mm
Reduction of continuous current depending on switching frequency and mounting type Switching frequency 20 kHz Pass-through mounting
0.14 A/K (starting at 32°C)
Reduction of continuous current depending on switching frequency and mounting type Switching frequency 5 kHz Pass-through mounting
No reduction
Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves
0.25 to 6 mm²
Temperature Operation Maximum
55°C
Terminal connection cross section Approbation data CSA
28 to 10 AWG
Reduction of continuous current depending on switching frequency and mounting type Switching frequency 10 kHz Pass-through mounting
No reduction
Relative humidity Operation
5 to 85%
Reduction of continuous current depending on switching frequency and mounting type Switching frequency 10 kHz Cold plate mounting
No reduction
Permissible mounting orientations Standing horizontally
No
Temperature Storage
-25 to 55°C
Reduction of continuous current depending on switching frequency and mounting type Switching frequency 20 kHz Cold plate mounting
0.13 A/K (starting at 45°C)
Permissible mounting orientations Hanging vertically
Yes
Max. motor line length depending on switching frequency Switching frequency 10 kHz
25 m
Dimensions Width
53 mm
Permissible mounting orientations Horizontal, face up
Yes
Relative humidity Storage
5 to 95%
Relative humidity Transport
Max. 95% at 40°C
Installation elevation above sea level Nominal
0 to 500 m
Input voltage Maximum
30 VDC
Switching threshold High
>15 V
Switching threshold Low
<5 V
Switching delay at nominal input voltage Enable 1 → 0, PWM off
Max. 20.5 ms
Switching delay Falling edge
53 µs ±0.5 µs (digitally filtered)
Switching delay at nominal input voltage Enable 0 → 1, ready for PWM
Max. 100 µs
Electrical isolation Input - Inverter module
Yes
Protective measures Open-circuit monitoring
Yes
Input voltage Nominal
24 VDC
Protective measures Undervoltage monitoring
Yes
Reduction of continuous current depending on installation elevation Starting at 500 m above sea level
0.19 Aeff per 1000 m
Output voltage DC bus voltage (UDC): 260 to 315 VDC
25 VDC * (UDC/315)
Output voltage DC bus voltage (UDC): 315 to 800 VDC
24 VDC ±6%
Max. motor line length depending on switching frequency Switching frequency 20 kHz
10 m
Power dissipation depending on switching frequency Switching frequency 20 kHz
[6 * IM² - 9.4 * IM + 430] W
Variant Shield connection
Yes
Protective measures Short-circuit and ground fault protection
Yes
Protective measures Overload protection
Yes
Voltage Nominal
750 VDC
Max. motor line length depending on switching frequency Switching frequency 5 kHz
25 m
Certifications CE
Yes
Power dissipation depending on switching frequency Switching frequency 10 kHz
[2.56 * IM² + 2.8 * IM + 200] W

Related documents 8BVI0014HCD0.000-1 Specs