8BVI0220HWS0.000-1 B&R Electronic Components

Product Details

• Weight5.2 kg
• Dimensions Height
  317 mm
• Terminal connection cross section Approbation data UL/C-UL-US
  20 to 8 AWG
• Permissible mounting orientations Horizontal, face up
  Yes
• Switching delay Rising edge
  52 µs ±0.5 µs (digitally filtered)
• Protective measures Overload and short-circuit protection
  Yes
• Reduction of continuous current depending on switching frequency Switching frequency 10 kHz
  0.4 A/K (starting at 31°C)
• Certifications UL
  cULus E225616; Power conversion equipment
• Module width
  2
• Peak current
  55 Aeff
• Dimensions Depth Wall mounting
  263 mm
• Temperature Operation Maximum
  55°C
• Terminal connection cross section Approbation data CSA
  20 to 8 AWG
• Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves
  0.5 to 6 mm²
• Temperature Operation Nominal
  5 to 40°C
• Dimensions Width
  106.5 mm
• Relative humidity Storage
  5 to 95%
• Relative humidity Transport
  Max. 95% at 40°C
• Relative humidity Operation
  5 to 85%
• Temperature Transport
  -25 to 70°C
Temperature Storage
-25 to 55°C
Switching delay Falling edge
53 µs ±0.5 µs (digitally filtered)
Installation elevation above sea level Maximum
4000 m
Permissible mounting orientations Standing horizontally
No
Installation elevation above sea level Nominal
0 to 500 m
Switching delay at nominal input voltage Enable 0 → 1, ready for PWM
Max. 100 µs
Switching delay at nominal input voltage Enable 1 → 0, PWM off
Max. 20.5 ms
Permissible mounting orientations Hanging vertically
Yes
Input voltage Maximum
30 VDC
Switching threshold Low
<5 V
Electrical isolation Input - Inverter module
Yes
Input voltage Nominal
24 VDC
Electrical isolation Input - Input
Yes
Switching threshold High
>15 V
Protective measures Undervoltage monitoring
Yes
Protective measures Open-circuit monitoring
Yes
Protective measures Overload protection
Yes
Max. motor line length depending on switching frequency Switching frequency 5 kHz
25 m
Variant U, V, W, PE
Connector
Max. motor line length depending on switching frequency Switching frequency 10 kHz
25 m
Max. motor line length depending on switching frequency Switching frequency 20 kHz
25 m
Protective measures Short-circuit and ground fault protection
Yes
Variant Shield connection
Yes
Reduction of continuous current depending on installation elevation Starting at 500 m above sea level
2.2 Aeff per 1000 m
Reduction of continuous current depending on switching frequency Switching frequency 20 kHz
0.31 A/K (starting at -16°C)
Power dissipation depending on switching frequency Switching frequency 20 kHz
[1.4 * IM² + 1.97 * IM + 230] W
Reduction of continuous current depending on switching frequency Switching frequency 5 kHz
No reduction
Power dissipation depending on switching frequency Switching frequency 10 kHz
[0.43 * IM² + 3.7 * IM + 110] W
Output voltage DC bus voltage (UDC): 315 to 800 VDC
24 VDC ±6%
Output voltage DC bus voltage (UDC): 260 to 315 VDC
25 VDC * (UDC/315)
Power dissipation depending on switching frequency Switching frequency 5 kHz
[0.13 * IM² + 5.5 * IM + 40] W
Voltage Nominal
750 VDC
Certifications KC
Yes
Pollution degree per EN 61800-5-1
2 (non-conductive pollution)
Certifications EAC
Yes
Discharge capacitance
0.22 µF
Overvoltage category per EN 61800-5-1
III
Certifications Functional safety
Yes
Degree of protection per EN 60529
IP20
Certifications CE
Yes
OSSD signal connections
Permitted ; Max. test pulse length: 500 µs
Modulation compared to ground potential
Max. ±38 V
Max. internal resistance
0.15 Ω
Continuous current
4.2 A
Response threshold for open-circuit monitoring
Approx. 0.5 A
Max. extinction energy per switching operation
3 Ws
Extinction potential
Approx. 30 V
Response threshold for undervoltage monitoring
24 VDC +0% / -4%
Max. switching frequency
0.5 Hz
Circuit
Sink
Input current at nominal voltage
Approx. 30 mA
Output voltage
24 VDC +5.8% / -0%
Fuse protection
250 mA (slow-blow) electronic, automatic reset
Terminal cable cross section dimension of shield connection
12 to 22 mm
Continuous current per motor connection
22 Aeff
Possible switching frequencies
5 / 10 / 20 kHz
Insulation stress of the connected motor per IEC TS 60034-25:2004
Limit value curve A
Max. output frequency
598 Hz
Continuous power per motor connection
16 kW
Nominal switching frequency
5 kHz
Quantity
2
Slots for plug-in modules
2
Input capacitance
32.9 µF
Max. power consumption
20 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake
Input voltage
25 VDC ±1.6%
B&R ID code
0xA16C
Continuous power consumption
16.2 kW
Variant
ACOPOSmulti backplane
Cooling and mounting type
Wall mounting
DC bus capacitance
495 µF

Related documents 8BVI0220HWS0.000-1 Specs