8BVI0880HWS0.004-1 B&R Electronic Components

Product Details

• Weight10.9 kg
• Temperature Operation Maximum
  55°C
• Relative humidity Operation
  5 to 85%
• Installation elevation above sea level Maximum
  4000 m
• Switching delay Falling edge
  53 µs ±0.5 µs (digitally filtered)
• Switching threshold High
  >15 V
• Electrical isolation Input - Inverter module
  Yes
• Max. motor line length depending on switching frequency Switching frequency 10 kHz
  25 m
• Reduction of continuous current depending on installation elevation Starting at 500 m above sea level
  8.8 Aeff per 1000 m
• Output voltage DC bus voltage (UDC): 315 to 800 VDC
  24 VDC ±6%
• Voltage Nominal
  750 VDC
• Dimensions Height
  317 mm
• Dimensions Depth Wall mounting
  263 mm
• Temperature Operation Nominal
  5 to 40°C
• Dimensions Width
  213.5 mm
• Relative humidity Transport
  Max. 95% at 40°C
• Relative humidity Storage
  5 to 95%
• Temperature Transport
  -25 to 70°C
• Switching delay Rising edge
  52 µs ±0.5 µs (digitally filtered)
• Temperature Storage
  -25 to 55°C
Permissible mounting orientations Standing horizontally
No
Installation elevation above sea level Nominal
0 to 500 m
Permissible mounting orientations Horizontal, face up
Yes
Permissible mounting orientations Hanging vertically
Yes
Switching delay at nominal input voltage Enable 0 → 1, ready for PWM
Max. 100 µs
Switching delay at nominal input voltage Enable 1 → 0, PWM off
Max. 20.5 ms
Input voltage Nominal
24 VDC
Switching threshold Low
<5 V
Electrical isolation Input - Input
Yes
Protective measures Undervoltage monitoring
Yes
Protective measures Open-circuit monitoring
Yes
Protective measures Overload and short-circuit protection
Yes
Input voltage Maximum
30 VDC
Max. motor line length depending on switching frequency Switching frequency 20 kHz
25 m
Max. motor line length depending on switching frequency Switching frequency 5 kHz
25 m
Variant Shield connection
Yes
Variant U, V, W, PE
M8 threaded bolts
Reduction of continuous current depending on switching frequency Switching frequency 20 kHz
0.56 A/K (starting at -90°C)
Protective measures Overload protection
Yes
Connection cross section range Flexible and fine-stranded wires
---
Protective measures Short-circuit and ground fault protection
Yes
Reduction of continuous current depending on switching frequency Switching frequency 10 kHz
0.92 A/K (starting at -5°C)
Reduction of continuous current depending on switching frequency Switching frequency 5 kHz
1.4 A/K (starting at 41°C)
Output voltage DC bus voltage (UDC): 260 to 315 VDC
25 VDC * (UDC/315)
Power dissipation depending on switching frequency Switching frequency 10 kHz
[0.11 * IM² + 11 * IM + 185] W
Power dissipation depending on switching frequency Switching frequency 20 kHz
[0.17 * IM² + 27 * IM + 310] W
Certifications EAC
Yes
Power dissipation depending on switching frequency Switching frequency 5 kHz
[0.03 * IM² + 7.9 * IM + 90] W
Certifications KC
Yes
Certifications UL
cULus E225616; Power conversion equipment
Certifications Functional safety
Yes
Module width
4
Overvoltage category per EN 61800-5-1
III
Pollution degree per EN 61800-5-1
2 (non-conductive pollution)
Degree of protection per EN 60529
IP20
Certifications CE
Yes
Discharge capacitance
0.44 µF
OSSD signal connections
Permitted ; Max. test pulse length: 500 µs
Circuit
Sink
Modulation compared to ground potential
Max. ±38 V
Max. switching frequency
0.5 Hz
Max. extinction energy per switching operation
3 Ws
Input current at nominal voltage
Approx. 30 mA
Response threshold for undervoltage monitoring
24 VDC +0% / -4%
Response threshold for open-circuit monitoring
Approx. 0.5 A
Extinction potential
Approx. 30 V
Max. internal resistance
0.15 Ω
Continuous current
4.2 A
Terminal cable cross section dimension of shield connection
12 to 50 mm
Output voltage
24 VDC +5.8% / -0%
Continuous power per motor connection
64 kW
Insulation stress of the connected motor per IEC TS 60034-25:2004
Limit value curve A
Continuous current per motor connection
88 Aeff
Fuse protection
250 mA (slow-blow) electronic, automatic reset
Possible switching frequencies
5 / 10 / 20 kHz
Nominal switching frequency
5 kHz
Max. output frequency
598 Hz
Cooling and mounting type
Wall mounting
Quantity
2
Continuous power consumption
65 kW
Peak current
176 Aeff
B&R ID code
0xA69F
Input voltage
25 VDC ±1.6%
Max. power consumption
27 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake
DC bus capacitance
1980 µF
Input capacitance
32.9 µF
Variant
ACOPOSmulti backplane
Slots for plug-in modules
2

Related documents 8BVI0880HWS0.004-1 Specs