8BVI0110HCS0.000-1 B&R Electronic Components

Product Details

• Weight2.4 kg
• Dimensions Depth Pass-through mounting
  209 mm
• Temperature Operation Maximum
  55°C
• Dimensions Depth Cold plate
  212 mm
• Temperature Operation Nominal
  5 to 40°C
• Terminal connection cross section Approbation data CSA
  28 to 10 AWG
• Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves
  0.25 to 6 mm²
• Reduction of continuous current depending on switching frequency and mounting type Switching frequency 20 kHz Pass-through mounting
  0.11 A/K (starting at -73°C)
• Terminal connection cross section Approbation data UL/C-UL-US
  30 to 10 AWG
• Reduction of continuous current depending on switching frequency and mounting type Switching frequency 20 kHz Cold plate mounting
  0.18 A/K (starting at -13°C)
• Reduction of continuous current depending on switching frequency and mounting type Switching frequency 10 kHz Pass-through mounting
  0.17 A/K (starting at 11°C)
• Reduction of continuous current depending on switching frequency and mounting type Switching frequency 10 kHz Cold plate mounting
  0.32 A/K (starting at 35°C)
• Reduction of continuous current depending on switching frequency and mounting type Switching frequency 5 kHz Cold plate mounting
  0.73 A/K (starting at 55°C)
• Reduction of continuous current depending on switching frequency and mounting type Switching frequency 5 kHz Pass-through mounting
  0.29 A/K (starting at 49°C)
• Dimensions Width
  53 mm
• Dimensions Height
  317 mm
• Relative humidity Operation
  5 to 85%
• Temperature Transport
  -25 to 70°C
• Relative humidity Storage
  5 to 95%
• Relative humidity Transport
  Max. 95% at 40°C
Temperature Storage
-25 to 55°C
Installation elevation above sea level Nominal
0 to 500 m
Permissible mounting orientations Standing horizontally
No
Permissible mounting orientations Hanging vertically
Yes
Installation elevation above sea level Maximum
4000 m
Permissible mounting orientations Horizontal, face up
Yes
Switching threshold High
>15 V
Switching delay Rising edge
52 µs ±0.5 µs (digitally filtered)
Input voltage Nominal
24 VDC
Switching delay Falling edge
53 µs ±0.5 µs (digitally filtered)
Switching threshold Low
<5 V
Switching delay at nominal input voltage Enable 0 → 1, ready for PWM
Max. 100 µs
Input voltage Maximum
30 VDC
Electrical isolation Input - Input
Yes
Switching delay at nominal input voltage Enable 1 → 0, PWM off
Max. 20.5 ms
Electrical isolation Input - Inverter module
Yes
Protective measures Open-circuit monitoring
Yes
Max. motor line length depending on switching frequency Switching frequency 20 kHz
10 m
Max. motor line length depending on switching frequency Switching frequency 5 kHz
25 m
Protective measures Undervoltage monitoring
Yes
Protective measures Overload and short-circuit protection
Yes
Variant U, V, W, PE
Connector
Protective measures Short-circuit and ground fault protection
Yes
Max. motor line length depending on switching frequency Switching frequency 10 kHz
25 m
Protective measures Overload protection
Yes
Variant Shield connection
Yes
Power dissipation depending on switching frequency Switching frequency 20 kHz
[0.87 * IM² + 10 * IM + 200] W
Reduction of continuous current depending on installation elevation Starting at 500 m above sea level
1.51 Aeff per 1000 m
Output voltage DC bus voltage (UDC): 315 to 800 VDC
24 VDC ±6%
Output voltage DC bus voltage (UDC): 260 to 315 VDC
25 VDC * (UDC/315)
Certifications KC
Yes
Certifications EAC
Yes
Power dissipation depending on switching frequency Switching frequency 10 kHz
[0.49 * IM² + 4.7 * IM + 95] W
Power dissipation depending on switching frequency Switching frequency 5 kHz
[0.16 * IM² + 5.6 * IM + 55] W
Voltage Nominal
750 VDC
Certifications UL
cULus E225616; Power conversion equipment
Module width
1
Certifications Functional safety
Yes
Degree of protection per EN 60529
IP20
Certifications CE
Yes
Discharge capacitance
0.14 µF
Overvoltage category per EN 61800-5-1
III
Pollution degree per EN 61800-5-1
2 (non-conductive pollution)
OSSD signal connections
Permitted ; Max. test pulse length: 500 µs
Modulation compared to ground potential
Max. ±38 V
Circuit
Sink
Response threshold for undervoltage monitoring
24 VDC +0% / -4%
Extinction potential
Approx. 30 V
Input current at nominal voltage
Approx. 30 mA
Response threshold for open-circuit monitoring
Approx. 0.5 A
Max. extinction energy per switching operation
3 Ws
Max. switching frequency
0.5 Hz
Max. internal resistance
0.3 Ω
Continuous current
2.1 A
Output voltage
24 VDC +5.8% / -0%
Possible switching frequencies
5 / 10 / 20 kHz
Terminal cable cross section dimension of shield connection
12 to 22 mm
Continuous current per motor connection
15.1 Aeff
Nominal switching frequency
5 kHz
Continuous power per motor connection
11 kW
Max. output frequency
598 Hz
Insulation stress of the connected motor per IEC TS 60034-25:2004
Limit value curve A
Peak current
37.7 Aeff
Fuse protection
250 mA (slow-blow) electronic, automatic reset
Input voltage
25 VDC ±1.6%
Slots for plug-in modules
2
Continuous power consumption
11.2 kW
Quantity
2
Cooling and mounting type
Cold plate or pass-through mounting
B&R ID code
0x269B
Max. power consumption
12 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake
Variant
ACOPOSmulti backplane
Input capacitance
23.5 µF
DC bus capacitance
330 µF

Related documents 8BVI0110HCS0.000-1 Specs