8BVI0660HWS0.008-1 B&R Electronic Components

Product Details

• Weight10.85 kg
• Dimensions Height
  317 mm
• Temperature Operation Nominal
  5 to 40°C
• Dimensions Depth Wall mounting
  263 mm
• Temperature Operation Maximum
  55°C
• Dimensions Width
  213.5 mm
• Relative humidity Storage
  5 to 95%
• Relative humidity Transport
  Max. 95% at 40°C
• Installation elevation above sea level Nominal
  0 to 500 m
• Temperature Transport
  -25 to 70°C
• Installation elevation above sea level Maximum
  4000 m
• Temperature Storage
  -25 to 55°C
• Permissible mounting orientations Horizontal, face up
  Yes
• Permissible mounting orientations Hanging vertically
  Yes
• Permissible mounting orientations Standing horizontally
  No
• Relative humidity Operation
  5 to 85%
• Switching delay Rising edge
  52 µs ±0.5 µs (digitally filtered)
• Input voltage Maximum
  30 VDC
• Switching delay Falling edge
  53 µs ±0.5 µs (digitally filtered)
• Switching threshold High
  >15 V
Switching threshold Low
<5 V
Electrical isolation Input - Input
Yes
Switching delay at nominal input voltage Enable 1 → 0, PWM off
Max. 20.5 ms
Electrical isolation Input - Inverter module
Yes
Input voltage Nominal
24 VDC
Variant Shield connection
Yes
Switching delay at nominal input voltage Enable 0 → 1, ready for PWM
Max. 100 µs
Protective measures Undervoltage monitoring
Yes
Max. motor line length depending on switching frequency Switching frequency 10 kHz
25 m
Protective measures Open-circuit monitoring
Yes
Connection cross section range Flexible and fine-stranded wires
---
Variant U, V, W, PE
M8 threaded bolts
Max. motor line length depending on switching frequency Switching frequency 5 kHz
25 m
Protective measures Overload and short-circuit protection
Yes
Max. motor line length depending on switching frequency Switching frequency 20 kHz
25 m
Protective measures Short-circuit and ground fault protection
Yes
Output voltage DC bus voltage (UDC): 315 to 800 VDC
24 VDC ±6%
Protective measures Overload protection
Yes
Reduction of continuous current depending on installation elevation Starting at 500 m above sea level
6.6 Aeff per 1000 m
Reduction of continuous current depending on switching frequency Switching frequency 5 kHz
1.4 A/K (starting at 41°C)
Power dissipation depending on switching frequency Switching frequency 10 kHz
In preparation
Power dissipation depending on switching frequency Switching frequency 20 kHz
In preparation
Output voltage DC bus voltage (UDC): 260 to 315 VDC
25 VDC * (UDC/315)
Reduction of continuous current depending on switching frequency Switching frequency 10 kHz
0.92 A/K (starting at -5°C)
Reduction of continuous current depending on switching frequency Switching frequency 20 kHz
0.56 A/K (starting at -90°C)
Certifications UL
cULus E225616; Power conversion equipment
Certifications Functional safety
Yes
Pollution degree per EN 61800-5-1
2 (non-conductive pollution)
Power dissipation depending on switching frequency Switching frequency 5 kHz
In preparation
Voltage Nominal
750 VDC
Degree of protection per EN 60529
IP20
Module width
4
Certifications CE
Yes
OSSD signal connections
Permitted ; Max. test pulse length: 500 µs
Overvoltage category per EN 61800-5-1
III
Modulation compared to ground potential
Max. ±38 V
Max. internal resistance
0.15 Ω
Max. extinction energy per switching operation
3 Ws
Max. switching frequency
0.5 Hz
Circuit
Sink
Discharge capacitance
0.44 µF
Extinction potential
Approx. 30 V
Input current at nominal voltage
Approx. 30 mA
Terminal cable cross section dimension of shield connection
12 to 50 mm
Fuse protection
250 mA (slow-blow) electronic, automatic reset
Response threshold for undervoltage monitoring
24 VDC +0% / -4%
Insulation stress of the connected motor per IEC TS 60034-25:2004
Limit value curve A
Continuous current
4.2 A
Output voltage
24 VDC +5.8% / -0%
Response threshold for open-circuit monitoring
Approx. 0.5 A
Peak current
132 Aeff
Continuous power per motor connection
48 kW
Max. output frequency
598 Hz
Possible switching frequencies
5 / 10 / 20 kHz
Slots for plug-in modules
2
Nominal switching frequency
5 kHz
B&R ID code
0x2C22
Continuous current per motor connection
66 Aeff
Quantity
2
Variant
ACOPOSmulti backplane
Input voltage
25 VDC ±1.6%
Input capacitance
32.9 µF
DC bus capacitance
1980 µF
Cooling and mounting type
Wall mounting
Continuous power consumption
48.8 kW
Max. power consumption
27 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake

Related documents 8BVI0660HWS0.008-1 Specs