8BVI0014HWD0.000-1 B&R Electronic Components
Part#:8BVI0014HWD0.000-1
Manufacturer:B&R
Product Lifecycle:Active
In-stock parts: 7
Jan 14, 2025
ACOPOSmulti inverter module, 1.9 A, AS, wall mounting, 2 axes
Check out the 8BVI0014HWD0.000-1 B&R price in the box on the right side or send a quick quote.
Product Details
- Weight2.8 kg
- Dimensions Width 53 mm
- Installation elevation above sea level Maximum 4000 m
- Installation elevation above sea level Nominal 0 to 500 m
- Permissible mounting orientations Horizontal, face up Yes
- Electrical isolation Input - Input Yes
- Permissible mounting orientations Hanging vertically Yes
- Switching delay at nominal input voltage Enable 0 → 1, ready for PWM Max. 100 µs
- Temperature Operation Maximum 55°C
- Terminal connection cross section Approbation data CSA 28 to 10 AWG
- Temperature Transport -25 to 70°C
- Relative humidity Transport Max. 95% at 40°C
- Permissible mounting orientations Standing horizontally No
- Switching delay Falling edge 53 µs ±0.5 µs (digitally filtered)
- Protective measures Overload and short-circuit protection Yes
- Protective measures Undervoltage monitoring Yes
- Variant Shield connection Yes
- Input voltage Nominal 24 VDC
- Protective measures Open-circuit monitoring Yes
- Max. motor line length depending on switching frequency Switching frequency 10 kHz 25 m
- Protective measures Short-circuit and ground fault protection Yes
- Max. motor line length depending on switching frequency Switching frequency 5 kHz 25 m
- Reduction of continuous current depending on switching frequency Switching frequency 20 kHz 0.11 A/K (starting at 15°C)
- Variant U, V, W, PE Connector
- Protective measures Overload protection Yes
- Reduction of continuous current depending on switching frequency Switching frequency 10 kHz No reduction
- Output voltage DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
- Output voltage DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (UDC/315)
- Reduction of continuous current depending on switching frequency Switching frequency 5 kHz No reduction
- Certifications KC Yes
- Power dissipation depending on switching frequency Switching frequency 5 kHz [1.2 * IM² + 2.62 * IM + 100] W
- Power dissipation depending on switching frequency Switching frequency 20 kHz [6 * IM² - 9.4 * IM + 430] W
- Certifications UL cULus E225616; Power conversion equipment
- Voltage Nominal 750 VDC
- Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
- Overvoltage category per EN 61800-5-1 III
- Input current at nominal voltage Approx. 30 mA
- Temperature Operation Nominal 5 to 40°C
- Dimensions Depth Wall mounting 263 mm
- Terminal connection cross section Approbation data UL/C-UL-US 30 to 10 AWG
- Relative humidity Storage 5 to 95%
- Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves 0.25 to 6 mm²
- Dimensions Height 317 mm
- Relative humidity Operation 5 to 85%
- Temperature Storage -25 to 55°C
- Switching delay Rising edge 52 µs ±0.5 µs (digitally filtered)
- Switching delay at nominal input voltage Enable 1 → 0, PWM off Max. 20.5 ms
- Switching threshold High >15 V
- Electrical isolation Input - Inverter module Yes
- Input voltage Maximum 30 VDC
- Switching threshold Low <5 V
- Max. motor line length depending on switching frequency Switching frequency 20 kHz 10 m
- Reduction of continuous current depending on installation elevation Starting at 500 m above sea level 0.19 Aeff per 1000 m
- Power dissipation depending on switching frequency Switching frequency 10 kHz [2.56 * IM² + 2.8 * IM + 200] W
- Certifications EAC Yes
- Certifications CE Yes
- Certifications Functional safety Yes
- Module width 1
- OSSD signal connections Permitted ; Max. test pulse length: 500 µs
- Degree of protection per EN 60529 IP20
- Discharge capacitance 0.2 µF
- Circuit Sink
- Modulation compared to ground potential Max. ±38 V
- Response threshold for open-circuit monitoring Approx. 0.25 A
- Continuous current 1.1 A
- Response threshold for undervoltage monitoring 24 VDC +0% / -4%
- Extinction potential Approx. 30 V
- Max. internal resistance 0.5 Ω
- Max. switching frequency 0.5 Hz
- Max. extinction energy per switching operation 1.5 Ws
- Insulation stress of the connected motor per IEC TS 60034-25:2004 Limit value curve A
- Output voltage 24 VDC +5.8% / -0%
- Max. output frequency 598 Hz
- Peak current per motor connection 4.7 Aeff
- Possible switching frequencies 5 / 10 / 20 kHz
- Nominal switching frequency 5 kHz
- Continuous current per motor connection 1.9 Aeff
- Fuse protection 250 mA (slow-blow) electronic, automatic reset
- Terminal cable cross section dimension of shield connection 12 to 22 mm
- Continuous power per motor connection 1.4 kW
- Max. power consumption 16 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake(s)
- Quantity 2
- DC bus capacitance 165 µF
- Continuous power consumption 2.91 kW
- Variant ACOPOSmulti backplane
- Slots for plug-in modules 2
- B&R ID code 0x26DF
- Input capacitance 23.5 µF
- Input voltage 25 VDC ±1.6%
- Cooling and mounting type Wall mounting
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8BVI0014HWD0.000-1 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price within minutes.
Stock:
7
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨