8BVI0220HWD0.000-3 B&R Electronic Components

Product Details

• Weight5.7 kg
• Dimensions Depth Wall mounting
  263 mm
• Dimensions Height
  317 mm
• Temperature Operation Maximum
  55°C
• Temperature Operation Nominal
  5 to 40°C
• Terminal connection cross section Approbation data CSA
  28 to 10 AWG
• Dimensions Width
  106.5 mm
• Terminal connection cross section Approbation data UL/C-UL-US
  30 to 10 AWG
• Relative humidity Storage
  5 to 95%
• Relative humidity Transport
  Max. 95% at 40°C
• Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves
  0.25 to 6 mm²
• Relative humidity Operation
  5 to 85%
• Temperature Transport
  -25 to 70°C
• Installation elevation above sea level Maximum
  4000 m
• Permissible mounting orientations Standing horizontally
  No
• Permissible mounting orientations Horizontal, face up
  Yes
• Temperature Storage
  -25 to 55°C
• Installation elevation above sea level Nominal
  0 to 500 m
• Permissible mounting orientations Hanging vertically
  Yes
• Switching delay Rising edge
  52 µs ±0.5 µs (digitally filtered)
Switching delay Falling edge
53 µs ±0.5 µs (digitally filtered)
Switching delay at nominal input voltage Enable 0 → 1, ready for PWM
Max. 100 µs
Switching delay at nominal input voltage Enable 1 → 0, PWM off
Max. 20.5 ms
Switching threshold High
>15 V
Electrical isolation Input - Input
Yes
Switching threshold Low
<5 V
Input voltage Nominal
24 VDC
Input voltage Maximum
30 VDC
Electrical isolation Input - Inverter module
Yes
Protective measures Open-circuit monitoring
Yes
Protective measures Undervoltage monitoring
Yes
Variant Shield connection
Yes
Max. motor line length depending on switching frequency Switching frequency 5 kHz
25 m
Protective measures Overload and short-circuit protection
Yes
Max. motor line length depending on switching frequency Switching frequency 10 kHz
25 m
Variant U, V, W, PE
Connector
Protective measures Overload protection
Yes
Protective measures Short-circuit and ground fault protection
Yes
Reduction of continuous current depending on installation elevation Starting at 500 m above sea level
2.2 Aeff per 1000 m
Reduction of continuous current depending on switching frequency Switching frequency 10 kHz
0.17 A/K (starting at -25°C)
Reduction of continuous current depending on switching frequency Switching frequency 5 kHz
0.33 A/K (starting at 40°C)
Output voltage DC bus voltage (UDC): 315 to 800 VDC
24 VDC ±6%
Output voltage DC bus voltage (UDC): 260 to 315 VDC
25 VDC * (UDC/315)
Certifications UL
cULus E225616; Power conversion equipment
Certifications EAC
Yes
Power dissipation depending on switching frequency Switching frequency 10 kHz
[2.16 * IM² - 10.912 * IM+ 190] W
Power dissipation depending on switching frequency Switching frequency 5 kHz
[0.65 * IM² - 0.35 * IM+ 64] W
Voltage Nominal
750 VDC
Certifications Functional safety
Yes
Certifications CE
Yes
Module width
2
Degree of protection per EN 60529
IP20
Pollution degree per EN 61800-5-1
2 (non-conductive pollution)
Overvoltage category per EN 61800-5-1
III
OSSD signal connections
Permitted ; Max. test pulse length: 500 µs
Discharge capacitance
0.44 µF
Modulation compared to ground potential
Max. ±38 V
Input current at nominal voltage
Approx. 30 mA
Circuit
Sink
Response threshold for open-circuit monitoring
Approx. 0.5 A
Max. internal resistance
0.3 Ω
Response threshold for undervoltage monitoring
24 VDC +0% / -4%
Max. switching frequency
0.5 Hz
Max. extinction energy per switching operation
3 Ws
Output voltage
24 VDC +5.8% / -0%
Continuous current
2.1 A
Extinction potential
Approx. 30 V
Terminal cable cross section dimension of shield connection
12 to 22 mm
Insulation stress of the connected motor per IEC TS 60034-25:2004
Limit value curve A
Max. output frequency
598 Hz
Possible switching frequencies
5 / 10 kHz
Quantity
2
Peak current per motor connection
55 Aeff
Nominal switching frequency
5 kHz
Max. power consumption
21 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake(s)
Continuous current per motor connection
22 Aeff
Continuous power per motor connection
16 kW
Fuse protection
250 mA (slow-blow) electronic, automatic reset
Slots for plug-in modules
2
Cooling and mounting type
Wall mounting
DC bus capacitance
1320 µF
Input voltage
25 VDC ±1.6%
Variant
ACOPOSmulti backplane
Note
Optimized for applications with decentralized, computationally intensive open-loop and closed-loop control requirements
Input capacitance
23.5 µF
Continuous power consumption
32.37 kW
B&R ID code
0xF374

Related documents 8BVI0220HWD0.000-3 Specs